1996 ADB THUMPER NATS CHAMPION GLEN BELLS 1997-XR630
ENGINE:
-
JE 630cc KIT
-
BALLARD MODIFIED "BIG FIN HEAD" WITH EXTENSIVE
PORTING, RD VALVES AND A BALLARD SUPPLIED RACE GRIND CAMSHAFT.
-
41MM KEIHIN PUMPER CARB.
-
BALLARDS HEADER PIPES
-
FMF MUFFLER
-
FOUR SPEED GEARBOX (5th has been removed)(Which
since proved to be a mistake for the Geelong round of the '97 thumper nats.)
-
WHITE BROS HEAVY DUTY CLUTCH SPRINGS
-
OIL SEPARATOR MOUNTED ON LEFT SIDE OF ENGINE,
ALLOWING ENGINE TO BREATHE WITHOUT BLOWING OIL OUT THE BREATHER TUBE.(see
picture)
-
15/48 RK SPROCKETS
SUSPENSION:
-
DEPENDING ON THE TRACK G.B. USES EITHER OF THE
FOLLOWING TWO FORK SETUPS:
-
BALLARD SORTED STANDARD FORKS, WITH RACE TECH
GOLD VALVES, RACE TECH .46 FORK SPRINGS, AND FORK BRACE.
-
'96 CR250 USD FORKS WITH RACE TECH DELTA VALVE
AND .46 RACE TECH FORK SPRINGS.
-
REAR SHOCK IS FITTED WITH A RACE TECH GOLD VALVE
AND 12.5 EIBACH SPRING
-
APPLIED RACING TRIPLE CLAMPS
-
AFAM HANDLEBARS
OTHER:
-
5.5L HAND CRAFTED ALLOY FUEL TANK WITH CHANNELS
TO DIRECT AIRFLOW TO THE AIRBOX.
-
XR400 SUBFRAME, AIRBOX, SEAT AND SIDE COVERS WITH
FRAME MODIFIED TO SUIT.
-
BILLET CLUTCH LEVER ASSEMBLY, GUIDE PLATE, AND
FRAME GUARDS BY WORKS CONNECTION.
-
FOOTPEGS RAISED 15mm
-
BLACK ACERBIS MUDGUARDS AND NUMBERPLATE.
-
BALLARDS HEAVY SEAT FOAM.
-
METZELER TIRES FRONT AND REAR
-
BALLARDS CASE SAVER
-
BALLARDS CHAIN GUIDE BRACE